Firewave Pro Red Light Therapy Device

Firewave PRO — Compact Red & Near-Infrared Panel, Meanwell Drivers

630nm · 660nm · 830nm

The Firewave PRO keeps the Firewave's 200W COB (Chip-on-Board) core — chips bonded directly to a substrate, no housings, no gaps, no scatter — and builds outward from it: 28 × 3W diodes around the COB instead of the Firewave's 12, for 284W total output and a wider lit area. The larger array is why the PRO covers more of you per session. Underneath, 350W-rated Meanwell industrial-grade drivers — the reason the chassis is slightly larger is that it houses them.

What the Meanwell drivers change: flicker drops from the standard Firewave's independently tested 3.2% to 0%, with no detectable magnetic field and stable output with headroom to spare — a 350W driver running a 284W panel is never working at its limit. No AC-powered device — anything that plugs into a wall outlet — can fully eliminate an electric field. And because irradiance stays strong at distance, you get full output from outside the fields rather than inside them. Both COB and LED on: 16 to 24 inches, 5 to 10 minutes. Start at 5 and build up. Exact time for your panel at any distance: emrtektimer.com.

The wavelengths: cytochrome c oxidase, the mitochondrial enzyme at the center of photobiomodulation research, has absorption peaks near 630nm, 660nm, and 830nm — so those are the PRO's three. 630nm works in the dermis (fibroblast activity, collagen production), 660nm reaches slightly deeper, and 830nm near-infrared penetrates centimeters into muscle, joint, and connective tissue. 830nm is invisible to the eye — wear the included blackout goggles every session.

Measured, not estimated: the PRO's COB is the same 200W chip that powers our Inferno, which Light Labs International, an independent lab, measured at 138.39 mW/cm² at 6 inches and 67.22 mW/cm² at 12 inches — so the PRO's core output matches those figures, with the expanded diode array widening the coverage around it. And you don't have to take the numbers on faith: the second video in the gallery above is Robert Hunt, author of The Blue Light Diet, measuring the Firewave PRO itself with his own spectrometer.

Start with one, expand later: modular connectivity lets you link additional units as your setup grows — one panel today, a stacked array down the road. Built-in global voltage (110/220V, no adapter). Blackout goggles included.

Check the Specs

• 284W total output · 28 × 3W diodes + 200W COB module
• 350W-rated Meanwell industrial-grade drivers · 0% flicker · no detectable magnetic field
• Irradiance: 138.39 mW/cm² at 6" · 67.22 at 12" (Light Labs International, same 200W COB as our Inferno)
• Wavelengths: 630nm · 670nm · 830nm
• Modular — links with additional Firewave PRO units
• Global voltage (110/220V, no adapter) · blackout goggles included
• Warranty: 2 years

Prefer the same COB core in a smaller, simpler package? The standard Firewave runs a 12-LED array with our long-serving driver design at 3.2% flicker.